'Reflex 51 Conditioning Module Selector' - application note to aid the selection of Reflex 51 conditioning module for a particular contact environment.

'A new generation of Chatter Test System for improved performance' - a paper describing the architecture of the Reflex 80 test system.

'A solution for the testing of complex multi-pole connectors and relays' - a paper examining the Reflex 950 connector test system

'Evaluating relay test equipment solutions for features, benefits and costs' - a paper which identifies the real cost of test per part.

'Guide to using external contact load voltages with the RT290' - a detailed look at the contact conditions when using the ASY0700 contact load unit with the RT290.

'Creating linked relay test steps to achieve a custom device test' - how to achieve a custom relay device test by linking ramp and contact resistance tests such that the coil control timing and drive levels act as if a single custom test had been created. An example is shown of measuring contact resistance's related to the measured operate and release voltage of the device.

'Testing two single contacts on each RT90/RT290 changeover contact' - how to connect two single contacts to each RT90 or RT290 changeover contact wiring to enable a relay constructed as (say) 2 Form-A and 2 Form-B contacts to be tested. Diagrams show how to connect the Kelvin wiring together with a small amount of additional circuitry and how to control it from the test.

'AN310196 'Fast testing with the RT290 parametric test system' - outlines the high speeds possible when testing relay devices on a production line using the RT290 parametric relay test system.